Mon - Fri: 9:00 - 19:00 / Closed on Weekends
AUS: +61 431 085 666
USA: +64  21 480 290

1/2 Inch Stainless Steel Air Operated Double Diaphragm Pump

AIR INLET:

LIQUID INLET:

LIQUID DISCHARGE:

CONNECTION TYPE:

MAX SUCTION LIFT CAPABILITY:

MAX FLOW RATE:

MAX PRESSURE:

MAX DIAMETER SOLIDS:

DISPLACEMENT PER STROKE:

1/4" FNPT

13 mm (1/2")

13 mm (1/2")

BSPT

5 m (Dry)

62 L/min (16.4 gpm)

6.9 bar (100 psi)

2.5 mm (3/32")

0.075 L (0.02 gal)

‍

The OVELL 1/2 inch stainless steel air operated double diaphragm pump is a compact industrial AODD pump designed for transferring chemicals, solvents, oils, coatings and other process fluids. Its stainless steel wetted construction provides reliable mechanical strength and dependable performance in demanding industrial environments.

This 1/2 inch AODD pump delivers a maximum flow rate of up to 62 L/min and operates at pressures up to 6.9 bar (100 psi). The air-operated design does not require an electric motor, making the pump suitable for applications requiring variable flow control, dry-running capability and reliable pneumatic operation.

The double diaphragm pumping principle enables the pump to handle low- to medium-viscosity liquids, fluids containing small suspended particles and materials that may be difficult for conventional centrifugal pumps. With a maximum dry suction lift of 5 metres and solids-handling capacity up to 2.5 mm, the pump is suitable for drum transfer, container unloading, chemical circulation, machine feeding and small-volume production processes.

Its compact size makes this stainless steel diaphragm pump suitable for installations with limited space. Typical applications include chemical processing, paints and coatings, adhesives and sealants, oil transfer, solvent handling and general industrial fluid transfer.

Different diaphragm, valve ball and valve seat materials can be selected according to fluid compatibility, operating temperature and process requirements. Contact OVELL for pump selection support, material compatibility guidance and application recommendations.

Compact Transfer and Equipment Integration

For the 1/2 inch stainless steel model, size the pump for the actual transfer rate, available installation space and container arrangement. Check performance at the required backpressure rather than choosing solely from the maximum flow. For additive feeding or sampling, confirm the control method and required accuracy separately; a transfer pump is not automatically a precision metering pump.

Performance Limits and Wetted Materials

The listed maximum flow of 62 L/min and maximum pressure of 6.9 bar are separate performance limits and are not achieved simultaneously. Select the working point from the model's performance curve. Suction performance, solids handling and dry-running conditions must be checked for the actual fluid and operating instructions.

Check the actual stainless steel grade and all diaphragm, ball, seat and seal materials for fluid composition, concentration and temperature. An industrial stainless steel construction does not by itself establish food-grade or hygienic suitability; confirm the complete sanitary design and supporting documentation if required.

Technical Downloads and Application References

Confirm the complete model, configuration and document revision. Cases are provided for process and configuration comparison; they do not establish interchangeability between different sizes, materials or duties.

Selection, Installation and Maintenance Guides

Request a Quote for a 1/2 Inch Stainless Steel AODD Pump

Send the fluid name and concentration, temperature, viscosity, solids size and concentration, required flow and discharge pressure at the same operating point, suction conditions, connections, available air supply, quantity and destination.

Contact OVELL for this model's selection and a quotation

13 mm (1/2″) Stainless Steel Air Operated Diaphragm Pump Detail

Related Products