Mon - Fri: 9:00 - 19:00 / Closed on Weekends
AUS: +61 431 085 666
USA: +64  21 480 290
Blog Image
November 16, 2026

AODD Pumps for Paints & Coatings: Reactor & Filtration

At a chemical paints and coatings plant, OVELL 1.5-inch and 2-inch aluminum air operated double diaphragm (AODD) pumps with PTFE diaphragms are used for reactor top feeding, reactor bottom discharge and filtration transfer. Both pump sizes serve all three processes.

OVELL aluminum AODD pumps in a chemical paints and coatings plant
OVELL aluminum diaphragm pumps at the coatings production site.

Reactor Top Feeding

Liquid raw materials are transferred into reaction vessels for mixing and processing. OVELL aluminum AODD pumps supply compatible liquid ingredients to reactor top inlets. Both 1.5-inch and 2-inch pumps are used, with selection based on required flow, liquid characteristics, piping arrangement and compressed-air supply.

These pneumatic diaphragm pumps suit intermittent batch-transfer duties, and flow can be adjusted through the air supply within the pump and system operating limits.

Reactor Bottom Discharge

After mixing or reaction, the pumps move coating materials from the bottom outlets of the vessels to downstream process equipment or intermediate tanks. Both pump sizes are used in this duty. Viscosity, solids content, suction conditions and discharge pressure must be reviewed for each installation.

OVELL aluminum AODD pump installed beside a coatings reactor
Close-up of an OVELL aluminum AODD pump at a coatings reactor installation.

AODD Pumps for Filtration Systems

Both the 1.5-inch and 2-inch AODD pumps also transfer coating materials through filtration equipment. Filter pressure drop, viscosity, suspended solids, pipeline resistance and maximum system pressure should all be considered when selecting a filtration-transfer pump.

As the filter loads with particles, resistance can increase and the available pump flow may decrease. The complete pumping and filtration system therefore needs to be evaluated together.

OVELL AODD pumps used for coating transfer and filtration
Field installation for coating transfer and filtration equipment.

Aluminum Housings and PTFE Diaphragms

Aluminum alloy offers a relatively lightweight and economical housing for compatible paints, coatings, resins and solvent formulations. PTFE diaphragms provide broad chemical resistance, but the diaphragm alone does not determine pump compatibility. The housing, valve balls, seats, O-rings and every other wetted component must be compatible with the actual formulation, concentration and temperature.

Safety and Pump Selection

If flammable solvents are present, assess hazardous-area requirements, equipment certification, bonding, grounding, ventilation and static-electricity control. Air operation alone does not make a pump certified for an explosive atmosphere.

Related OVELL Pump Solutions

Explore OVELL aluminum diaphragm pumps, our paints and coatings solutions and a related 2-inch AODD pump and bag-filter application. For configuration advice based on fluid properties, flow and pressure, contact OVELL.

‍

‍