Mon - Fri: 9:00 - 19:00 / Closed on Weekends
AUS: +61 431 085 666
USA: +64  21 480 290
Blog Image
November 17, 2026

2-Inch PP Diaphragm Pumps in Electroplating

Electroplating wastewater can contain acidic and alkaline streams, dissolved metals and suspended solids. Reliable liquid transfer is essential between collection, equalization and treatment stages. At this facility, OVELL 2-inch polypropylene (PP) air operated double diaphragm pumps are used for two actual duties: acidic and alkaline wastewater transfer and treated sludge transfer.

OVELL 2-inch PP diaphragm pumps installed at electroplating wastewater treatment facility
OVELL PP AODD pumps installed beside treatment tanks and piping.

Acidic and Alkaline Wastewater Transfer

The 2-inch PP diaphragm pumps transfer acidic and alkaline wastewater within the electroplating treatment system. Polypropylene offers useful resistance to many compatible acids and alkalis. Suitability must still be checked against the actual chemical composition, concentration and operating temperature, including all wetted components.

Treated Sludge Transfer

The facility also uses this pump type to transfer sludge produced during wastewater treatment. An air operated double diaphragm pump (AODD pump) can handle selected solids-bearing liquids. Pump selection should account for solids content, particle size, viscosity, suction conditions and required discharge pressure. Diaphragms, valve balls and seats must also be selected for chemical compatibility and wear resistance.

Close-up of OVELL 2-inch polypropylene AODD pumps and connections in electroplating plant
Close-up of the PP pumps, air lines, valves and transfer piping.

Why PP AODD Pumps Suit These Duties

Corrosion resistance: PP housings can handle many compatible wastewater chemicals. Compressed-air drive: pneumatic operation supports flexible equipment integration. Self-priming and dry-run tolerance: useful for fluctuating liquid levels. Solids handling: appropriate configurations can transfer selected sludge and suspended-solids mixtures. Maintenance: the design does not use a conventional rotating shaft seal.

Wetted Materials and Pump Selection

PP housing material alone does not guarantee suitability for every electroplating fluid. Check the complete wetted-end configuration, including the diaphragm, valve balls, seats and seals. Confirm actual flow, pressure, temperature and particle limits for the selected 2-inch model before installation.

OVELL Wastewater Transfer Solutions

OVELL supplies polypropylene, PVDF, aluminum and stainless steel diaphragm pumps for different industrial transfer duties. Explore our 2-inch plastic diaphragm pump, water and wastewater applications, or contact OVELL for pump selection and an inquiry.

OVELL - Your Long-Term Pumping Partner.